REDCINE-X PRO (WINDOWS)

Recommended System Requirements

• OS: Windows 10 or later 64-bit (latest update)
• Storage: Drive speed that can sustain 800MB/s or higher
• Memory: 32GB RAM
• Graphics: 16GB GPU Video RAM (when using GPU acceleration)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: NIKKOR Z Lens Distortion Correction support.
• Improved: Broadcast gain & detail for clips shot with updated Broadcast firmware.
• Improved: Black offset in GPU image processing with high gain settings in IPP2.
• Fixed: Broadcast non-SDR decodes were too bright.
• Fixed: Rare crash when 3D LUT is applied with steep user curve.
• Fixed: Rare crash when loading N-RAW or R3D NE clips.

Copyright © 2004-2026 RED Digital Cinema, Inc. All rights reserved.

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: R3D NE support.

Copyright © 2004-2025 RED Digital Cinema, Inc. All rights reserved.

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: Support for Nikon N-RAW (.nev) clips.
• Added: Six new ISO settings: 64, 8000, 10000, 16000, 20000 & 25600.
• Fixed: Crash on Mac when applying a 1D Lut in Post Effects.
• Fixed: Black image on CUDA when applying a 1D Lut in Post Effects.
• Fixed: Highlights clipping in Legacy CPU decodes.

View Release Notes

Copyright © 2004-2025 RED Digital Cinema, Inc. All rights reserved.

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Extended Highlights general release.
• Added: Broadcast image processing pipe for clips recorded in Broadcast mode.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2025 RED Digital Cinema, Inc. All rights reserved.

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: Support for Enhanced Highlight clips.
• Fixed: Occasional crash when populating scopes on Mac.
• Fixed: Image artifacts during scaling when exporting to EXR.
• Fixed: Black frames during playback when using two GPUs on Mac.
• Fixed: Crash at startup on Linux.
• Fixed: Clips show as offline when power is lost during recording.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2024 RED Digital Cinema, LLC. All rights reserved.

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: Notarization of Mac installation package.
• Added: ND stops metadata for V-RAPTOR XL.
• Changed: Improved IPP2 demosaic edge interpolation on strong color transitions.
• Fixed: Lens metadata for Komodo/V-Raptor could be missing.
• Fixed: Several bugs in IPP2 half-demosaic CPU output.
• Fixed: Legacy decodes will now ignore RGB gains metadata if they are all set to 0.
• Fixed: Per-frame metadata not being saved when exporting to EXR and CUDA was enabled.
• Fixed: HDRx Simple Blend not working on Mac, and HDRx Magic Motion not working on all platforms.
• Fixed: Crash when user clicks the Input Devices tab in the Preferences dialog.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2023 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build 60.3.11 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Fixed: On Windows, the user could not exit out of full screen mode by pressing Ctrl-F.
• Fixed: Kernel panic on Mac if an AJA device is plugged in.
• Fixed: Exporting an R3D in REDline produces no output when CUDA is enabled.
• Fixed: On Mac, REDline dumps a large number of error messages to its output.
• Fixed: RED Player crashes on Mac.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2023 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build 55.1.52132 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Fixed: Possible artifacts with GPU decode at 1/4 or lower decode resolutions.
• Fixed: Application startup performance when there are no CUDA devices in the system.
• Fixed: IMU data missing and/or being corrupt in multi-file V-RAPTOR R3D clips.
• Fixed: OpenCL memory management issue.
• Fixed: REDPlayer OpenCL GPU decode issues.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2022 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build 54.0 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: Support for V-RAPTOR.
• Added: The ability to delete Broadcast WAV side car files
• Added: KOMODO sensor name.
• Optimized: CUDA and OpenCL GPU utilization
• Enhanced: Demosaic
• Fixed: Some clips failing to load.
• Fixed: Image not updating when some of the controls were changed.
• Fixed: White Balance issue.
• Fixed: Issue loading some long clips.
• Fixed: Green tint showing up on some clips when using CUDA.
• Fixed: CNR creating artifacts.
• Fixed: OpenCL export producing discolored images.
• Fixed: CPU image issues with 10 bit DPX pixel types.

REDCINEX-PRO 54 Known Issues

• Crashes on some systems when a 2K Monstro clip is scrubbed before it finishes loading.
• Crashes on some systems when switching System Preferences between CUDA and OpenCL, and attempting to load a clip, without restarting REDCINE-X PRO.
• On some systems switching between full screen and windowed mode causes the screen to flicker (corrected by switching in and out of full screen mode again).
• Crashes on some systems when accessing new clips on a NAS drive from one machine, but another machine in the same network works fine (corrected by disabling Auto Save RMDs, probably related to temporary OS write protections).

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

View Release Notes

Copyright © 2004-2021 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build v53.0.51001 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THIS BUILD

• Added: OpenCL GPU Decode.
• Fixed: An issue deleting sound files from the browser.
• Fixed: Potential memory allocation errors when doing CUDA GPU Decode.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2021 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build v52.3.50721 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THISBUILD

• Added: Support for Komodo Anamorphic.
• Fixed: Image not updating when some of the controls were changed.
• Fixed: An issue supporting camera sensor flip when GPU decode is enabled.
• Fixed: Possible error when selecting audio auto match folder.

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2021 RED Digital Cinema, LLC. All rights reserved.

REDCINE-X Professional Build v51.0.47074 – Windows (64-Bit) Build

System Requirements

• 64-bit Windows Vista to Windows 10 (version 1809)
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)
• Windows 4GB GPU Video RAM (when using GPU R3D decompression)

Before upgrading, go to the Release History page and review the release notes for information on compatibility and roll back restrictions.

CHANGES IN THISBUILD

• Added: Windows accelerated R3D decompression on supported NVIDIA CUDA GPUs
• Added: Chroma Noise Reduction in IPP2 (On/Off)
• Added: Flashing Pixels (Off, Mild, Medium, Strong)
• Added: Image: Noise Reduction Panel
• NOTE: Image Noise Reduction features are only available in Full Debayer for the Viewer Window and in Full and Half Premium Debayer for Export
• NOTE: To add/remove panels, right-click in a panel and select a panel from the drop-down menu.
• Added: New half resolution premium debayering in IPP2
• Added: HDR support for select AJA and Blackmagic Design devices
• Added: Viewer Window IPP2 / Primary Development Only view toggle
• Added: REDline CDL export
• Added: REDline Primary Development Only export
• Added: Monitor Out preferences page
• Added: Left and Right frame cropping
• Added: Startup splash screen
• Enhanced: Cleaned up the default REDCINE-X Pro Home Page
• Enhanced: ProRes 4444 XQ no longer restricted to just log output
• Enhanced: ProRes encoder now sets Rec.2020 and HDR-2084 metadata
• Enhanced: Creative 3D LUT ALT-key Preview mode lock
• Fixed: RMD file Creative 3D LUT fixes
• Fixed: Marker loading issues

To take advantage of Windows R3D decompression on NVIDIA CUDA GPUs, ensure that the latest NVIDIA driver is installed via a clean installation to ensure all residual NVIDIA drivers are removed.
If performance issues are observed with a multiple NVIDIA CUDA GPU configurations, please ensure that a clean installation of the latest NVIDIA CUDA driver has been performed.

Copyright © 2004-2019 RED.COM, LLC. All rights reserved.

REDCINE-X Professional Build 50.5 Release – Windows (64-bit) Build

System Requirements

• 64-bit Windows Vista or later
• 1GB hard drive space
• 8GB RAM (recommended)
• 2GB GPU Video RAM (when using GPU acceleration)

CHANGES IN THISBUILD

• Fixed: REDWideGamutRGB output incorrectly had gamut mapping applied in the standard (Full_Graded) IPP2 image processing pipeline.
• Fixed: Corrupt thumbnail image if the Poster Frame was out of range.
• Fixed: Issue created in v50.4 that stopped Creative 3D LUTs from being saved to Projects and Look Presets.

Note: REDROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Note: NVIDIA Cuda acceleration requires compute capability 2.0 or higher capable GPU on Mac with the latest NVIDIA Cuda Driver.
Note: NVIDIA/AMD OpenCL acceleration requires OpenCL 1.1 or higher capable GPU.

Copyright © 2004-2018 RED.COM, LLC. All rights reserved.

REDCINE-X Professional Build 42 Release – Windows (64-bit) Build

System Requirements

• Mac OS X 10.7 or later
• 64-bit Windows Vista or later
• 1GB hard drive space
• 8GB RAM (recommended)
• 1GB GPU Video RAM (when using GPU acceleration)

CHANGES IN THISBUILD
Added: HELIUM 8K accelerated decoding with REDROCKET-X + GPU (high-end GPU recommended).
Added: Log3G10 and REDWideGamutRGB gamma and color space options (available when Advanced Controls are enabled).
Fixed: Possible decode issues for HELIUM sensor clips.
Fixed: Waveform Mode menu is no longer disabled on app load.
Fixed: Issue applying 3D LUTs in REDLINE.

Note: REDROCKET support requires driver 2.1.23.0 and firmware 1.1.18.0 or higher.
Note: REDROCKET-X support requires driver 2.1.31.0 and firmware 1.4.1.16 or higher.
Note: NVIDIA Cuda acceleration requires compute capability 2.0 or higher capable GPU on Mac with the latest NVIDIA Cuda Driver.
Note: NVIDIA/AMD OpenCL acceleration requires OpenCL 1.1 or higher capable GPU.

Copyright © 2004-2017 RED.COM, LLC. All rights reserved.